Bluetooth Network Adapters DSD TECH HM11 Bluetooth 4.0 BLE Module with 6 PIN Board Compatible
Bluetooth protocol: Bluetooth Specification V4.0 BLE. Working frequency: 2.4 GHz ISM band. Interface way: a serial port. Open environment within 30 meters can realize communication between modules. To send and receive no byte limit between modules. Modulation method: GFSK (Gaussian Frequency Shift Keying)
HM11 TI CC2540 CC2541 Bluetooth V4.0 BLE Module For Apple And Android (IM151118001)
Bluetooth V4.0 HM-11 BLE Module. This SMD BLE module is based on TI cc2541 chip, enables robust network nodes to be built with low total bill-of-material costs and highly suited for ultralow power consumption systems.
Bluetooth V4.0 HM11 BLE Module
Features: Bluetooth protocol: Bluetooth Specification V4.0 BLE. Working frequency: 2.4 GHz ISM band. Interface way: a serial port. Open environment within 30 meters can realize communication between modules. To send and receive no byte limit between modules. Modulation method: GFSK (Gaussian Frequency Shift Keying)
DSD TECH Official Website DSD TECH HM11 Bluetooth 4.0 BLE Module
You can then connect via bluetooth to the BT module and you will have created a virtual serial connection to the arduino. anything you send to the BT module will be sent to the RX of the pro mini serial port. If you connec to the BT module with your laptop, it will enumerate a COM port.
Módulo Bluetooth HM11 4.0 BLE Arduino para iOS e Android Usinainfo
HM-10, HM-11, HM-12 is Bluetooth V4.0 BLE version. Use TI Chip. HM-01, HM-02, HM-09, HM-10 have same size and same pins. HM-05, HM-06, HM-07, HM-11 have same size and same pins.
Bluetooth V4.0 HM11 BLE Module Australia Little Bird
The BLE Bee is a Bluetooth Smart enabled XBEE form factor module based on HM-11 module. The BLE Bee can be used in hardware setups, where normally an XBEE module is used. Using a BLE Bee an XBee socket enabled embedded system can communicate with desktop computers, smartphones, table computers and even other embedded systems.
Arduino Bluetooth 4.0 BLE TI CC2541 Module Low Power HM11 Bluetooth Serial Port Module
Bluetooth protocol: Bluetooth Specification V4.0 BLEWorking frequency: 2.4 GHz ISM bandInterface way: a serial portOpen environment within 30 meters can realize communication between modulesTo send and receive no byte limit between modules
HM11 Bluetooth module low power use Ben's electronics
Supporting BLE communications with iphone, ipad and Android 4.3.
\n